Solar Water Heater
Your Eco-Friendly Hot Water Solution
Overview
Solar water heaters harness solar heat energy to produce hot water. Typically, a conventional solar water heater consists of a solar collector positioned on a building’s roof, connected to a water-storage tank. The system enables unheated water to flow from the tank through the collector, undergoing direct heating, or it may be heated by a high-capacity heat-exchange fluid. This fluid, heated within the collector, transfers warmth through tubes immersed in the water within the tank. While passive methods can facilitate heat transfer without mechanical assistance, “active” solar hot water systems employ electricity to circulate the heat-exchange fluid and operate mechanical pumps and controllers.
FRP INNER TANK SOLAR SYSTEM
How It Works?!
The collector panel, an integral element of the solar water heating system, receives the Sun’s rays. Within the collectors, a dark-absorbing surface (absorber) absorbs solar radiation and conveys the resulting heat energy to the flowing water. The warmed water is then gathered in an insulated tank to prevent any loss of heat.
We Design & Ship Solar Systems
You Install System, Or Contract With Us
Smartest Way To Generate Electricity
Why Us?!
On average, the installation of a solar water heater can lead to a significant reduction of 50%–80% in your water heating bills. Furthermore, the use of solar energy, which is freely provided by the sun, safeguards you from potential fuel shortages and future price increases.
7 Years Replacement Guarantee 0% Heat Loss 100% Rust Free
Technical Details
- Inner Tanks (Water Storage): High quality food grade FRP Tank thickness 3mm to 5mm
- Outer Tank (Cover tank): Hot deep Galonized steel thickness 0.75 mm
- Heat Insulation (PUF): High density polyurethane integrated foam-forming layer with 72 hours heat preservation (50 mm PUF insulation)
- Vacuum Tube: 58×1800 & 58 x 2100 three target coating glass vacuum tube 1.6mm thickness
- Water Inlet-Outlet Nipple: FRP 1.5″ nipple (with 1.5″ x 1″55 reducer)
- Stand: PP Plastic coated Gi steel thickness 1.2 mm
| Model | Tube Size | Tube QTY. | Size(H*L*W) | MRP(in Rs) |
| 100 LPD | 58*1800 | 10 | 60*72*42 | 21,500 |
| 150 LPD | 58*1800 | 15 | 60*72*59 | 27,500 |
| 200 LPD | 58*1800 | 20 | 60*72*75 | 35,500 |
| 250 LPD | 58*1800 | 25 | 60*72*91 | 41,500 |
| 300 LPD | 58*1800 | 30 | 60*72*108 | 48,500 |
| 500 LPD | 58*1800 | 32 | 60*84*114 | 68,500 |